The wall helps retain heat which can help warm the back of the batbnb, making it more appealing to bats. Bats need a drink on very hot summer.
Locate the top lip of the bat house, just above the slanted roof section.
How to hang a bat house on a pole. The entrance of the batbnb should be a minimum of 12 feet high. This is one reason installing them on existing light or utility poles is a bad idea. If your building is not tall enough, you can always consider hanging your batbnb on a pole instead.
* avoid brightly lit areas or shiny surfaces. Most commercial bat house poles or posts will come with mounting brackets and instructions on how to attach a bat house to the pole. Mounting a bat house on a pole can be a good choice, but only for multichamber bat houses.
If a wall is not an option, the second best option is to hang it on a pole. Mount the bat house on the side of a building or pole. Choose a pole, building or tree clear of other obstructions and situated away from bright lights.
Luckily, you can summon a natural ally by building a homemade bat house. The bat house will be more attractive to bats if it is within 1,500 feet of a permanent stream or pond. Locate the right spot for your bat house.
Be sure you anchor your pole in the ground with concrete to help support the weight of the bat house and its occupants. The side of a tall pole also works. One of the most important factors in hanging your bat house is the height.
To the extent possible, locate all houses 20 to 30 feet from tree branches or other obstacles and 12 to 20 feet above ground (or above the tallest vegetation beneath the bat house). Bats rarely use boxes mounted to metal buildings The best place to hang a bat house is on a pole or a building.
The ideal height for a bat house is around 12 to 20 feet (3.7 to 6.1 m) off of the ground. As well, a warm bat house will attract mama bats looking to nest. Buildings are less versatile than poles, because, obviously, you can’t move a building to match the ideal bat roosting requirements.
The biggest thing to keep in mind is to make sure that no screw tips go into the roosting area of the bat box, this would be a hazard to any roosting bats. The last place you want to put your bat house is in a tree. Female bats refuse to nest in locations they deem too cold.
Do not install above doors, window, vents or walkways. In certain areas, a bat house can be mounted around 30 feet. Single chamber houses usually do not work well on poles unless you mount two of them back to back.
Cut a piece of 2 by 4 in (5.1 by 10.2 cm) wood to the length of the bat house. Do not hang on an active service pole. Bat houses should not be lit by bright lights.
Place bat houses 15 to 20 feet off the. We recommend first considering hanging your batbnb on a wall if that option is available. Do not place in a shaded location.
Measure the height of the bat house and use a saw to cut a piece of 2 by 4 in (5.1 by 10.2 cm) wood to length. This height helps bats have a clear space to drop to catch flight. However, we’ve found 20 feet tends to work better.
This will provide a flat surface that you can attach the bat house to, rather than attempting to screw it directly onto the pole. With the bat house in place, take one of the included 2 ½” mounting screws with countersunk steel washer and fasten the top of the bat house to the pole mount bracket, spacing the screws evenly across the top lip of the bat house. As you can see in the photos below, it only takes two men to raise a double mounting of our triple cell bat house.
If you choose to mount your bat house on a pole, make sure it is a minimum of 10 feet off the ground. Use bat houses for mosquito control. How high off the ground should i hang my bat house?
Hang the bat house twelve to fifteen feet above the ground on the south or southeast side of a freestanding pole. It makes a very hard job very easy. Should i hang my bat house on a tree, house, or pole?
The sunlight will warm the bat house up to an ideal temperature for bats. Controlling mosquito populations can be tricky.